Kippanhänger und Schubboden, Verkauf, Mieten und Ersatzteile von Newton Trailers
Truck and Trailer Hydraulics, PTO and Pumps
Newton Trailers have expert hydraulic fitters and a full parts store on their purpose built site in Milton Keynes. We can make and break all hydraulic pipes on site up to 2 inch. We can therefore provide you with new pipes or repair your cranes, cylinders or wet gear conveniently 200 meters from J13 of the M1 in Milton Keynes.
Newton Trailers Limited are specialists in Keith Walking Floor trailers and Cargo Floor trailers as well as all tipping trailers. We therefore need to provide our customers with the PTO, Pump and Wet Gear packages to power up these trailers. Time after time trucks present themselves with under specified pumps and systems and are unable to make floors move either at all or to their correct capabilities.
Let us therefore fit your new PTO, Pump or Wetgear.
Power Take Off Units PTO
Newton Trailers Limited are Distributors or Agents for most makes of Power Take Off units where power is required to be taken from a gearbox, engine driven or split drive line to power ancillary equipment on any chassis mounted application.
All Power Take Off Units are available from stock and come complete with mounting kits and gaskets, available to suit full range of applications in 2,3 and 4 bolt mounting as a direct replacement brand range:
PTO and Quill Shaft
BEZARES power take off units
STALLION HYDROCAR power take off units
OMFB power take off units
WEBSTER/DRUM power take off units
PZB power take off units
- Allison PTO
- Bezares PTO
- Eaton PTO
- Fuller PTO
- Hydrocar PTO
- Isuzu PTO
- Iveco PTO
- Mercedes PTO
- Mitsubishi PTO
- Scania PTO
- Volvo PTO
- Webster PTO
- ZF PTO
- Clutch Type PTO Range
- Flange Drive PTOs
- Heavy Duty PTO Range
- Split Shaft PTOs
- Standard Duty PTO Range
- Tractor PTOs
- Twin Output PTO Range
- PTO Pressure & Contact Switches
Sunfab Walking Floor Piston Pump
Newton Trailers Limited are Distributors or Agents for most makes and models of Hydraulic Pumps to suit nearly all high pressure applications. The range consists of gear, vane and piston pumps that can give oil flows of up to 200 cm3/rev and pressures in the region of 400 bar. To support our UK leading Expertise in Keith Walking Floor tm and Cargo Floor trailer systems we specialise in fitting correctly balanced Walking Floor piston pumps to suit walking floor applications. We aim to fit a PTO system in a day in order that you can drive away with your new walking floor and know that the system is correct.
To enable us to properly advise customers about unit compatibility we always require the following information:-
Make and type number of the PTO, the make and type number of the pump if fitted, the type of truck and the gearbox details of the truck from which the PTO has been removed, the type of truck and the gearbox details of the truck to which the PTO is going to be fitted. From the pump make and type we can determine the capacity and rotation direction of the unit to check if it is suitable for the new application. If for example it is intended to power a different equipment, this may need a different pressure and flow. If you provide the foregoing information at the time of enquiry, this will considerably help us to help you quickly and efficiently.
Hydraulic Cylinders and Rams
We are repair and service agents for Hyva cylinders and for Edbro cylinders. We can refurbish or supply new cylinders for Hyva and Edbro. We aim to be very competitive on original replacement rams and cylinders for tippers and ejectors.
We are repair and service agents for Keith Walking Floor and Cargo Floor cylinders. We have on stock all that is required for almost all repair and replacement situations.
Cargo Floor and Walking Floor Drive Cylinders On Stock
OEM supplied Fuel and Hydraulic Split Tank
Now for the tricky bit. Fitting hydraulic tanks to fit to 6x4 tractor units in the UK is – let us face it – a nightmare. We aim to have a tank for the job for all the common makes of 6x4
We aim to have a correctly manufactured tank – not a cut and shut home made tank. We work closely with ACGB tanks of Italy who are OEM to many of the big names such as Scania and DAF. This means the tanks are lighter and are technically more proficient than a non branded tank. They will withstand vibration better and will resist cavitation and breathe better. This will increase the efficiency and ensure the best life for the pump and ancillary equipment. However sometimes the only tank that can be made to fit certain difficult truck situations we will need to manufacture from scratch.
Pressure Flow and Temperature Testing
Keith Walking Floor Repairs and Cargo Floor Repairs
We are the UK number one dealer in Keith Walking Floor and Cargo Floor trailers. We aim to be number one with Keith Walking Floor and Cargo Floor trailer repairs and spares. With 18 years of experience in trouble shooting hydraulic control valve problems and all sorts of truck trailer interaction problems we can measure and repair all faults. We have complete Walking Floor System control valves, ball valves and check valves on stock.
We have complete Cargo Floor system control valves, piping etc for every system that is on the roads of the UK.
Cargo Floor Control Valve On Stock
We have taken on members of staff from the now defunct Reynolds Stantone company from Olney. They aim to give you the same good service that you enjoyed there – speak to Adam and he will do what he can to advise or fit. Call +44 1525 872466 (Kontakt Paul) or email email@example.com
You can search the parts area of the website for common hydraulic parts. Adam has extensive experience with Palfinger crane repairs, Atlas crane repairs and Hiab crane repairs. He will repair hydraulic pipes, hydraulic control systems for all types of cranes.